If you are going to install an air conditioning system that will have ducting, you must do this in a certain way to ensure its success. It is better to hire a professional that will be able to help you do this, but if you don’t have the money, you can still attempt this on your own. You will be installing not only the ducting, but also the AC compressor and hooking it up to this network of air ducts. Here is an overview of how that process works so that you can try to do this on your own if you need an AC system installed. Here is our ducted air conditioning installation guide.
What Will You Need?
First of all, you will need to get the air conditioning system. You will also need to get the parts to hook it up to either your electrical or gas system for power. You will need an extensive amount of ducting, and you will also need certain tools. You will need to cut out and intake hole to bring the air in, and you will also have to cut holes in either your floor or ceilings in order to deliver the air that will be coming through the air ducts. Once you have everything that you will need, you can start the process.
Install The Air Conditioning System First
The first step of the process is to hook up your air conditioning. You will have to mount the air conditioning unit so that it is stable. It will need to be hooked up to your circuit breaker box, or if you are using propane, it will be connected via the leads that are provided. Once it is installed, you can then tested out. You can always contact as professional to help you, similar to a Bradenton air conditioning repair company, if you don’t feel you can do this on your own. This is where working with a professional would be beneficial. After the testing, you will then begin to start cutting into your ceiling and floor so that you can begin to at the ducting. You will have to feed the ducting underneath the floor, which means you will have to crawl into your crawlspace. It will need to be fastened up off of the ground, even if you have concrete, and each and will have a 90 that will allow you to connect it to the floor up above. If you are installing this in a two-story home, you must do this through the crawlspace that is in between the levels. Once that is in place, you will hooked the main portion of the ducting up to the AC unit. You can then test the system once again. The next part of our ducted air conditioning installation guide is how to do troubleshooting.
Troubleshooting Your System
There are several things that you will need to check if it is not working properly before potentially searching for an air conditioning repair service Lynchburg. If it is an electrical system, make sure the breaker has not tripped. If it has, you will need to upgrade the circuit so that it can handle the proper amount of amperage or voltage. If it is with the AC unit, you need to check the refrigerant lines, evaporator coil, and make sure that the coolant is at nominal levels. One other problem that might occur is that your intake could be blocked. You may hear the AC system working, but no air is coming through. After you check all of this, and if it is still not working, you will still need to contact an AC Repair professional. They can easily assess the problem and fix the unit so that you will have cold air in your home.
Installing your own central air conditioning system is not easy. You must make sure that you have all of the proper tools and equipment necessary. The air conditioning unit will likely come with directions. As long as you follow those, the installation process should be easy. The most difficult part will be the ducting. You must make sure that you cut it to length, and that it is fastened securely. If you have done troubleshooting on your system, and if it is not working, contacting a professional HVAC company will definitely solve the problem. Hopefully our ducted air conditioning installation guide will allow you to avoid using a professional and simply install it on your own.